Table of Contents
Advertisement
When you get an error message on the camera...
Monitor indication
q
There is a problem with
the card.
CARD ERROR
Writing to the card is
q
prohibited.
WRITE-
PROTECT
The internal memory
has no available
>
memory and cannot
MEMORY FULL
store any new data.
The card has no
q
available memory and
cannot store any new
CARD FULL
data.
There are no pictures in
L
the internal memory or
NO PICTURE
on the card.
There is a problem with
r
the selected picture and
PICTURE
it cannot be played back
ERROR
on this camera.
r
If pictures taken by other
cameras are selected,
THE IMAGE
they cannot be edited.
CANNOT BE
EDITED
The battery/card
compartment cover is
open.
CARD-COVER
OPEN
The battery is empty.
g
BATTERY
EMPTY
This card cannot be
used in this camera. Or,
C A R D S E T U P
the card is not formatted.
POWER OFF
FORMAT
SET
OK
There is an error in the
M E M O R Y S E T U P
internal memory.
POWER OFF
MEMORY FORMAT
SET
OK
Possible cause
Corrective action
This card cannot be used. Insert a
new card.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
Insert a card or erase unwanted
data. Before erasing, backup the
data of important pictures using the
card. or download such pictures to a
computer.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
The internal memory or the card
contains no pictures.
Record pictures.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
Use image processing software to
edit the pictures.
Close the battery/card compartment
cover.
Charge the battery.
Format the card or replace.
• Select [POWER OFF] and press
. Insert a new card.
• Select [FORMAT]
press . All data on the card is
erased.
Select [MEMORY FORMAT]
[YES] and press . All data in
the internal memory is erased.
[YES] and
53
EN
Advertisement
Table of Contents
