Table of Contents
Advertisement
Disassembly and Assembly instructions
5
3
1) Assemble FOLDER UPPER with FOLDER
LOWER following the orders as above
picture is shown.
※ caution
1) Be careful not to make scratch and
molding damage!
7
1) Attach Screw rubber caps on the screws
by using a pincette.
※ caution
1) Be careful not to make scratch and
molding damage!
This Document can not be used without Samsung's authorization
1
4
2
SAMSUNG Proprietary-Contents may change without notice
6
1) Screw up the FOLDER UPPER at the above
two points.(M1.7xL3.5)
※ caution
1) Be careful not to make scratch and
molding damage!
2) Use 1.2 ± 0.2 Kgf.cm!
8
1) Insert LCD FPCB[which is connected to
FOLDER] into the bottom of FRONT Hinge.
2) The FOLDER's projection inserts the
FRONT'S hole when Projection is pushed
3) Assemble FOLDER with FRONT
※ caution
1) Be careful not to make scratch and
molding damage!
5-5
Advertisement
Table of Contents
