Removal; Disassembly; Reed Valve Assembly; Main Stand - Yamaha QT 50F Service Manual

B. Main Stand
Remove main stand and bracket from engine.
9. Remove the carburetor.
D. Removal
1. Remove rear shock absorber holding
bolt from shaft drive.
2. Remove the engine mounting bolt and
remove engine from front side of frame.
3-2. DISASSEMBLY
A. Reed Valve Assembly
Remove manifold, reed valve assembly hold-
ing screws and reed valve assembly.
1. Reed valve assembly
2. Reed valve
3. Reed valve stopper
4. Panhead screw
5. Spring washer
6. Reed valve plate
7. Valve seat packing 1
8. Valve seat packing 2
9. Manifold
10. Panhead screw
C. Kick Crank (Kick Starter)
Remove kick crank securing bolt and kick
crank.
D. Drive Shaft (Rear Arm Comp.)
Remove rear arm comp. from engine.
E. Magneto
1. Remove left crankcase cover screw and
cover.
2. Remove the flywheel securing nut. (use
Flywheel holding tool)
1. Flywheel holding tool
3-3