Olympus EVOLT E-330 Advanced Manual page 21

Setting functions using the control panel screen
Select an item on the control panel screen and change the setting.
1
Press the i button.
• The cursor on the control panel screen lights.
Control panel screen
2
Use the arrow pad p to move the cursor
to the function you want to set.
Eg.) When setting white balance
3
Turn the control dial to change the
setting.
• Pressing the i button while the item is being
selected displays the menu for that function.
Turn the control dial to change the setting.
• If you do not operate the control dial within a
few seconds, your setting will be confirmed
and the control panel screen will be restored.
Control panel operation procedures
This manual shows the control panel operation procedures (until the
direct menu is displayed) as below.
Eg.) When setting white balance
i p WB i
Cursor
How to set the functions
Control dial
p Arrow pad
i button
Direct menu
1
21