Exp/E/Iso; Ev Step; Iso Step; Iso-Auto Set - Olympus E-3 Instruction Manual

Custom Menu 1 e EXP/e/ISO

EV STEP

You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV].

ISO STEP

You can select the EV step of the ISO sensitivity from [1/3EV] or [1EV].

ISO-AUTO SET

You can set the upper limit and default ISO values when ISO is set to [AUTO].
[HIGH LIMIT]
This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 100 to 3200 in 1/3 EV increments.
[DEFAULT]
This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 100 to 3200 in 1/3 EV increments.

ISO-AUTO

You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P/A/S]
In P/A/S mode, the [AUTO] setting is activated. When [AUTO] is set in other
shooting modes, ISO 100 is set.
[ALL]
The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.

AELMetering

You can set the metering mode when pressing the AEL/AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
8

BULB TIMER

You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1 f # CUSTOM

#X-SYNC.

You can set the shutter speed that will be used when the flash fires. The speed can be set
from 1/60 to 1/250 in 1/3 EV increments.
• For details on the synchronization speed of commercially available flashes, refer to their
manuals.

#SLOW LIMIT

You can set the slow limit of the shutter speed that will be used when the flash fires. The
speed can be set from 1/30 to 1/250 in 1/3 EV increments.

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity
96
control will be performed.
EN