Protecting Images - Olympus E-3 Instruction Manual

Copying selected frames
This function lets you select multiple images and copy them all at the same time during
single-frame playback or index display.
1
Display the images you want to copy and press the
i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
2
Press p to display the next images you want to
copy and press the i button.
3
After you have selected the images to copy, press
the COPY/< button.
4
Use ac to select [YES], then press the i
button.
Copying all the frames
1
MENU [q] [COPY ALL]
2
Press d.
3
Use ac to select [YES], then press the i
button.

Protecting images

7
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
86
EN
COPY SELECT
YES
NO
CANCEL SELECT GO
COPY ALL
YES
NO
CANCEL SELECT GO
0 button
i button