Setting The Date And Time In Another Time Zone; Dual Time Setup - Olympus DIGITAL CAMERA SP-320 Advanced Manual

Setting the date and time in another time
zone (DUAL TIME SETUP)
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [X]. After setting, you can switch
between the new setting and the time set in [X].
Top menu
(Setting dual time
1
Select [ON], and press q.
2
Press sr to set the year, and
press q to move to the month
setting.
• To move back to the previous setting,
press p.
7
• The first two digits of the year are fixed.
• The date format is the same as that set
in Step 1 of [X].
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4
Press Z.
• For a more accurate setting, press Z when the time signal hits 00 seconds.
• The date and time switches to dual time.
(Switching the date and time
1
Select [OFF] or [ON], and press Z.
OFF Switches to the date and time set in [X].
ON Switches to the date and time set in [DUAL TIME SETUP].
114
[MODE MENU] [SETUP]

[DUAL TIME SETUP]

g"Using the menus" (P. 17)
PIXEL MAPPING
DUAL TIME
SETUP
m/ft
DUAL TIME SETUP
2006 . 01 . 01
SELECT SET
OFF
ON
00 : 00
OK
GO