FujiFilm S1000fd Owner's Manual page 149

• Connecting
Connect the camera and TV correctly.
120
After the movie playback mode is stopped,
109,
There is no image
connect the camera and TV correctly. 120
or sound on the
Set the TV input to "VIDEO".
Connecting to TV
TV.
Change the setting to [NTSC] or [PAL]. 111,
113
The TV volume is turned down. Adjust the volume.
The TV image is The video output setting is incorrect.
Change the setting to [NTSC] or [PAL]. 111,
black and white.
113
PC does not The USB cable is not correctly connected Set up the camera, and connect the USB
Connecting to PC recognize the
to the PC or camera.
cable correctly. 130
camera.
Connecting to Cannot print with
• The USB cable is not correctly • Set up the camera, and connect the USB
printer PictBridge.
connected to the printer or camera. cable correctly.
121
• The printer is not turned on . • Turn the printer on.
• Others
F!~~'
Nothing happens
Briefly remove the batteries or disconnect
the AC power adapter and DC coupler.
15,16
when pressing the
Then reload the batteries or reconnect the
buttons on the
AC power adapter and try again.
camera.
The batteries have run out. Load new or fully charged batteries. 15,17
-t
Camera operation
..
0
c
etc.
Camera malfunction may be caused Briefly remove the batteries or disconnect
cr
CD
temporarily. the AC power adapter and DC coupler.
en
The camera no
::r
Then reload the batteries or reconnect the
0
longer works 15,16
0
AC power adapter and DC coupler and try
:::
correctly.
=
again. If you think the camera is faulty,
ca
contact your FUJIFILM dealer.
149