Adjustment Method - Sony KV-AR252M61 Trinitron Service Manual

KV-AR252M61
RM-W102
e. OTHER FUNCTION VIA REMOTE COMMANDER
7, -
All the data becomes the values in memory.
8, - All user control goes to the standard state.
[Display], - Service data initialization (Be sure not to use usually.)
2, 5 Select Device or Category (Up, Down)

3-2. ADJUSTMENT METHOD

Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the
2. Raise/lower the data with the
3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the [MUTING] button. (The display changes to WRITE.)
5. Execute the writing with the
SERVICE.)
Example on screen display :-
Use the same method for all Items. Use
[MUTING], then execute the write with
Note : 1. In [WRITE], the data for all items are written into memory together.
2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
and buttons, or
1 4
and buttons.
3 6
button. (The WRITE display will be changed to red color while excuting, and back to
-
GEOM 00 HPOS 1F SERVICE
637S 1.0C 59 7F
GEOM 00
HPOS 1F WRITE
637S 1.0C 59 7F
Write with [MUTING]
WRITE
GEOM 00 HPOS 1F
1.0C
637S 59 7F
Write executed with
and
1 4
.
-
and .
2 5
60
GREEN
Adjusted with 3
0 000A
and 6 buttons.
60
GREEN
0 000A
60
RED
The WRITE display
0 000A
then the display
returns to green
SERVICE.
to select the adjustment item, use
– 14 –
and to adjust, write with
3 6