Connecting The Camera To The Computer - Olympus CAMEDIA C-5000 Zoom Reference Manual

Connecting the camera to the computer

Users running Windows 98/98SE need to install the USB drive before
connecting the camera to your computer for the first time. (
1
Some camera models have
a "USB" setting in the
menu. Make sure that "PC"
is selected before
connecting. This is not
required if your camera
does not have this setting.
For details on how to
operate the menu, refer to your camera's reference manual.
2
Insert the marked end of the provided USB cable into the USB
port on your computer as shown below.
The location of the USB port varies depending on the computer. For details,
refer to your computer's manual.
3
After making sure that the camera is turned off, connect the end
of the USB cable to the USB connector on the camera.
The location of the USB connector or multi connector varies depending
on the camera model. Refer to the camera manual for details.
Computer
[SETUP] tab
Look for this mark.
USB port
Rectangular terminal
USB port
USB cable
USB connector or
multi connector
Menu button
Terminal
Smaller terminal
p.9)
Arrow pad
11