Network Settings - Sony HT-XT2 Operating Instructions Manual

• [Audio Return Channel] (page 39)
Set this function when the system is
connected to a TV's HDMI IN jack that
is compatible with Audio Return
Channel. The function is available
when you set [Control for HDMI] to
[On].
[Auto]: You can listen to TV sound
from the speakers of the system.
[Off]: Use this setting when an optical
digital cable is connected.
[Quick Start/Network Standby]
[On]: Shortens the startup time from
standby mode. You can operate the
system quickly after turning it on.
[Off]: Off
[Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system for about 20 minutes, the
system enters standby mode
automatically.
[Off]: Off
[Auto Display]
[On]: Automatically displays
information on the TV screen when
changing the audio signals, picture
mode, etc.
[Off]: Displays information only when
you press DISPLAY.
[Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
(page 43).
[Off]: Off
[Auto Update Settings]
[Auto Update]
[On]: Software update is automatically
executed between 2 a.m. and 5 a.m.
local time in the selected [Time Zone]
while this system is not in use. If you
select [Off] in [Quick Start/Network
Standby], software update is performed
after you turn off the system.
46
US
[Off]: Off
[Time Zone]
Select your country/region.
Notes
• Software update may be performed even
if you select [Off] in [Auto Update]
depending on the details of the updates.
• Software update is performed
automatically within 11 days of a new
software release.
[Device Name]
You can change the name of this system
according to your preference so that it is
more recognizable when using the
[Bluetooth Audio] or [Screen mirroring]
function. The name is also used with
other networks, such as the home
network. Follow on-screen instructions
and use the software keyboard to enter
the name.
[System Information]
You can display the system's software
version information and the MAC
address.
[Software License Information]
You can display the Software License
Information.

[Network Settings]

[Internet Settings]
Connect the system to the network
beforehand.
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable. When you select this setting,
the wireless LAN function of the system
is disabled automatically.
[ ]
Wireless Setup : Select this when you
use the built-in Wi-Fi function of the
system to connect to a wireless
network.