19) Separate the CARD CONNECTOR SPACER from
the CARD CONNECTOR PWB. Do not use the CARD
CONNECTOR SPACER again. Discard it.
21) Turn the ENGINE BOARD over and use the
tweezers to remove the AV CONNECTOR. Do not
use it again. Discard it.
23) Remove the AV JACK with the tweezers.
15
Nokia I nternal Use Only | Copyright © 2012 Nokia | A ll rights reserved
Nokia 808 PureView (RM-807)
20) Disconnect the AV CONNECTOR with the SS-
93.
22) Use an AV plug to lever out the AV JACK.
24) Use the SS-93 to release the FLASH MODULE.
L1L2 Service Manual
Version 3.0