7) Unscrew the four TORX+ size 6 screws in the
order shown.
9) To remove the ENGINE BOARD, first release the
bottom end of the ENGINE BOARD with the SS-93.
11) Disconnect the three connectors carefully
with the SS-93. Be careful not to damage the
connectors or any nearby components.
13
Nokia I nternal Use Only | Copyright © 2012 Nokia | A ll rights reserved
Nokia 808 PureView (RM-807)
8) Lift the BODY ASSEMBLY up.
10) Turn the ENGINE BOARD carefully over. Be
careful not to damage the flexes.
12) Lift up the ENGINE BOARD.
L1L2 Service Manual
Version 3.0