Connection Diagram For Standard Mode With Internal Amp - Pioneer DEH-P88RSII Installation Manual

Connecting the Units

Connection diagram for standard mode with internal amp

Antenna jack
Power cable
(For details, refer to page 3 to 4.)
5
This product
DSP switch
Switch the DSP switch as
illustration below.
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white (6*)
Speaker leads
: Front left +
White
: Front left ≠
White/black
: Front right +
Gray
: Front right ≠
Gray/black
: Rear left +
Green
: Rear left ≠
Green/black
: Rear right +
Violet
: Rear right ≠
Violet/black
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
30 cm