Compaq Presario 5070 Maintenance And Service Manual page 82

MSG index Product Description
Home Removal & Replacement
REMOVAL & REPLACEMENT
Processor &
goalposts
System Board Components
Memory
module
AMD K6-2 Processor
Video
This page shows the removal and replacement procedure for an AMD K6-2 processor.
memory
Click the link to see how to remove a
Battery
System
board
Heat sink
clip
I-O panel
System
board
components
index page
l
Maintenance and Service Guide
Compaq Presario 5000, 5100, and 5200 Series Computers
Troubleshooting
Jumper & Switch Information
Pentium II or Celeron II processor.
Illustrated Parts Catalog
Specifications
Perform preparation
1
procedures
2 Remove the hood
3 Remove the fax/modem
4 Open the system board
bracket
5 Locate the AMD K6-2
processor
6 Remove the clip from the
heat sink
7 Lift up the ZIF socket handle
and lift the heat sink
processor out of the socket
To reinstall the AMD K6-2
processor, rub a thermal transfer
crayon on the bottom of the
heatsink, then reverse the steps
above. (The thermal transfer
crayon replaces the thermal pad
used with earlier K6 processors.)
and