Compaq Presario 5070 Maintenance And Service Manual page 49

MSG index Product Description
Home Removal & Replacement
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE
Fax/modem
Electrostatic
discharge
Service
considerations
Preparation
for
disassembly
Serial number
Hood
Fax-modem
System board
bracket
Serial port
assembly
Mass storage
devices
System board
Power supply
Front bezel
Instant On
button board
Creativity
Action Center
Fan
Maintenance and Service Guide
Compaq Presario 5000, 5100, and 5200 Series Computers
Troubleshooting
Jumper & Switch Information
Illustrated Parts Catalog
Specifications
1 Perform preparation
2 Remove the hood.
3 Remove the screw holding the
fax/modem bracket to the
chassis and pull the fax/modem
out of slot.
Note: If other option cards are
installed, you may need to
remove these before removing
the fax/modem.
For 5070, 5184, and 5185
models, the fax/modem is
located in the top slot above the
two option slots.
To replace the fax/modem, reverse this
procedure.
IMPORTANT: When replacing the
fax/modem,
download the latest
software from
SoftPaq. If
QuickRestore is
used, it may not
have the 56K
upgrade software
included.
procedures.