Philips 37TA1800/93 Service Manual page 9

Step 5. Remove the Bezel assy as Fig.12~Fig.15 .
a. Remove the 5 screws as Fig.12
b. Remove the 4 screws as Fig.13
c. Remove the 4 screws as Fig.14
d . Remove the Bezel assy as Fig.15
4. Mechanical Instructions
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
Fig. 11
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig. 12
Fig. 13
Fig. 14
Fig. 15
TPT1.0A LA 9