Philips 37TA1800/93 Service Manual page 4

4
TPT1.0A LA
1.2.2.3.5 Component Video
The input signals are applied to display through Component
Video RCA Jack pin assignment
PIN NO. SIGNAL
1 GND
Red à Pr
2
3 GND
Blue à Pb
4
5 GND
Green àY
6
1.2.2.3.6 SCART
Scart connector is only used in WE model. The Scart (Syndicat
des Constructeurs d'Appareils Radiorécepteurs et Televiseurs)
connector is used for combined audio and video connections.
Pin TV SCART
1 N/C
2 Right audio input
3 N/C
4 Audio ground
5 Blue ground
6 Left audio input
7 Blue output
8 0-2.5 volts (low) when:
TV output
4.5-7.5 volts (High-to-6v) when:
-inputting picture format setting is '16:9',
9-12 volts (high-to-12v) when:
-inputing picture format setting is '4:3'
9 Green ground
10 N/C
11 Green output
12 N/C
13 Red ground
14 N/C
15 Red output
16 0 volt (low) when:- pin 8 of the TV scart is
low
or when:
- Composite video signal
1-3 volts (high) when:
- video input setting is 'RGB',
17 Composite video output ground
18 Composite video input ground
19 N/C
20 Composite video input
21 Ground
1. Technical Specifications and Connections