Product Setup; Quick Installation - D-Link DUB-H4 Quick Installation Manual

PrODUCT
SETUP

QUICK INSTALLATION

DUB-H4
1. Plug the power adapter into the connector located on
the back of the DUB-H4. Plug the other end into a
wall outlet. The LED on the DUB-H4 will turn green to
indicate that the hub is receiving power.
Note: This step is optional, but required for Fast-
Charge Mode. Please refer to the next page for more
information.
2. Plug the smaller end of the included USB cable into the
back of the DUB-H4.
3. Plug the rectangular end of the included USB cable
into an available USB port on your computer.
4. Your computer will automatically detect and install the
drivers for the DUB-H4. You may now connect USB
2.0 or USB 1.1 devices to any available USB port.
The black USB port with the battery icon is for
connecting to an iPad
and can quick-charge these devices when in Fast-
Charge Mode. Please refer to the next page for more
information.
Note: Power draw for devices connected to the white
ports should not exceed 500 mA, and the combined
power draw of all connected devices should not exceed
2 A.
®
or other high-power device,
3