Resetting The System - Sony HT-NT5 Operating Instructions Manual

Sensors of the TV do not work
properly.
 The unit may block some sensors
(such as the brightness sensor), the
remote control receiver of your TV or
the emitter for 3D glasses (infrared
transmission) of a 3D TV that supports
the infrared 3D glass system, or
wireless communication. Move the
unit away from the TV within a range
that allow those parts to operate
properly. For the locations of the
sensors and remote control receiver,
refer to the operating instructions
supplied with the TV.
Wireless functions (wireless LAN,
BLUETOOTH, or subwoofer) are
unstable.
 Do not place metal objects other than
a TV around the system.
66
US

Resetting the System

If the system still does not operate
properly, reset the system as follows.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
3
Select [Resetting] - [Reset to
Factory Default Settings].
4
Select the menu item you want to
reset.
5
Select [Start].
To cancel resetting
Select [Cancel] in step 5.
Note
By resetting, the link with the subwoofer
may be lost. In this case, perform
"Performing the Wireless Connection of
the Subwoofer (LINK)" (page 42).