Configuring Access Point; Connecting To Web-Based Interface - D-Link DAP-1360 Quick Installation Manual

DAP-1360

CONFIGURING ACCESS POINT

Connecting to Web-based Interface

1. Start a web browser.
2. In the address bar of the web browser, enter http://dlinkap/ or
http://192.168.0.50/ (the default IP address of the access point).
Press the Enter key.
3. On the opened page, enter the username and password for the
administrator
correspondingly (by default, the following username and password are
specified: admin, admin). Then click the Enter link.
If the error " The page cannot be displayed " (or " Unable to display the
!
page "/" Could not connect to remote server ") occurs upon connecting to
the web-based interface of the access point, make sure that you have
properly connected the device to your computer.
account in the
Quick Installation Guide
Login and Password fields
14