Digital Manual Setup - Samsung DVD-SH853 Instruction Manual

HDD & DVD RECORDER
HDD
Library Digital Channel List
Digital Favorite Channel
Guide
Auto Setup
Channel

Digital Manual Setup

Timer Record
Analogue Manual Setup
Disc Manager
Setup
m MOVE s SELECT
Manual Scanning
Country
Channel type
Scan Mode
Channel Number
Frequency
Bandwidth
Signal status 0%
Start
Digital 816.500MHz, BW:7MHz, FFT:Auto
DTV
Your digital receiver found
SBS HD
DTV
SBS DIGITAL 1
SBS DIGITAL 2
SBS EPG
Progress
Signal status
HDD & DVD RECORDER
HDD
Library
Digital Channel List
Digital Favorite Channel
Guide
Auto Setup
Channel
Digital Manual Setup
Timer Record
Analogue Manual Setup
Disc Manager
Setup
m MOVE s SELECT
PR CH
01 ---
02 ---
03 ---
04 ---
05 ---
06 ---
07 ---
Edit
A
Time Zone
PR
CH
Name
MFT
System
mMOVE sSELECT
Downloaded From Disc-Player.com Samsung Manuals
Channel
|
|
|
|
|
r RETURN e EXIT
: Australia
: Digital
: All
◄ ►
: CH 5
◄ ►
: 177500KHz
◄ ►
: 7MHz
◄ ►
Cancel
Manual Scanning
Radio
4 2
SBS RADIO 1
4
Radio 2
SBS RADIO 2
OK
e EXIT
Channel
|
|
|
|
|
r RETURN e EXIT
Manual Setup
Name System
---- -/-
---- -/-
---- -/-
---- -/-
---- -/-
---- -/-
---- -/-
Delete Swap
B C
Manual Setup
01
---
◄ ►
----
- - - Ι - - -
Ι
B/B
Save
Digital Manual Setup
To tune-in new channels, the HDD & DVD Recorder has been provided
with the option Manual Scan where the channel data can be entered by
user.
To setup, follow steps 1~2 in page 27.
3. Press the ▲▼ buttons to select Digital Manual Setup, then press OK
or ► button.
4. Select the Channel Number which you want to nd using ◄►
buttons.
Select Frequency and input the Frequency of the channel you want to
nd by pressing the number button.
Select Bandwidth which you want to nd using ◄► buttons.
When the valid frequency is input, the bandwidth is selected
automatically. You can select the value of 6,7 or 8 MHz. After select
option. Press OK button to start the scanning process.
Analogue Manual Setup
To setup, follow steps 1~2 in page 27.
3. Press the ▲▼ buttons to select Analogue Manual Setup, then press
OK or ► button.
4. Press the ▲▼ buttons to select a PR(programme) you wish to edit,
delete, or swap, then press the COLOUR button.
Select Edit, Delete or Swap.
•
In case of Edit (RED(A) button) : You can add or edit
PR(programme) information. After change PR informations (CH.,
Name, MFT, System), select Save, then press the OK button.
- CH : Tune the channel using ◄► buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name by
using ▲▼◄► buttons.
- MFT(Manual Frequency Tunning) : You can tune up the channel
frequency better using ◄► buttons.
- System : You can select broadcasting system of the receivable
channel (B/G or B/B)
•
In case of Delete (GREEN(B) button) : the channel information of
selected PR(programme) will be removed.
•
In case of Swap (YELLOW(C) button) : You can swap the channel
information of two PR(programme). For example, if you wish to swap
PR2 and PR5, select swap at PR2, then press the OK button at PR5.
English - 28