Olympus C-460 Reference Manual page 105

White balance
2
Press e.
• The white balance is set and
the screen returns to the
mode menu.
• To cancel one-touch white
balance, press b.
6
3
Press e repeatedly untill the menu disappears.
• When setting the white balance by pointing the camera at a sheet of
white paper, the correct setting may not be obtained if the light
Note
reflected by the paper is too bright or too dark.
• White balance may not be effective under some special light
sources.
• After setting a white balance other than AUTO, play back the picture
and check the colors on the monitor.
• When the flash is fired with a white balance setting other than
AUTO, colors may appear different in the resulting picture from the
colors you see on the monitor.
104
e
button
SQ1 SQ1 1600 1200 1600 1200
One-touch white balance
F2.8 F2.8