Samsung np-q1ex User Manual page 173

Game and Program Related
A 3D game does not work, or some
Q
functions are not working.
A Change the graphics settings of the
game to '2D' or 'Software Renderer',
then run the program again.
Running speed of a game is too
Q
slow or fast.
A Change the setting of the Power
Schemes to 'Always On'.
(Click the Start > Control Panel >
Performance and Maintenance >
Power Options > Power Schemes
tab, then configure the Power
schemes field to 'Always On'.)
The picture is not displayed
Q
properly for some games.
A Some games such as 'Harry Potter
and the Sorcerer's Stone', 'Harry
Potter and the Chamber of Secrets',
etc. may not display the picture
properly when the screen resolution is
set to 1024x768 and the color quality
is set to 32 bit.
For these games, set the screen
resolution to 1024x768, and the color
quality to 16 bit.
The game is not displayed
Q
smoothly on the screen.
A For 3D games, the texture data for
the 3D screen display is saved to the
system memory.
If there is insufficient system memory,
the data is saved to the hard disk
drive and loaded to memory when
required. This operation may
temporarily stop displaying the picture
on the screen.
In this case, lower the game
resolution or the screen settings.
173