Samsung np-q1ex User Manual page 162

I have pressed the Wheel button
Q
after connecting the Organizer and
changed the output to both the
LED and the projector in the MENU
program, but the screen is not
displayed properly.
A Press the Wheel button to run the
MENU program and select LCD+CRT
Clone in LCD/CRT.
The screen may not be displayed
or only part of the screen may be
displayed when the LCD resolution is
too low or too wide and the projector
cannot support the resolution.
Right-click over the Desktop, select
Properties, select the Settings
tab and change the Resolution to
800x600.
I have connected a monitor (or
Q
projector) to the computer, but
the colors on the monitor are
abnormally displayed.
A Check if the monitor and computer
are properly connected with the signal
cable and reconnect the cable if
necessary.
The picture on the screen
Q
trembles.
A The picture on the screen may
tremble when you view some Internet
pages or play some on-line games. In
this case, using an external monitor is
recommended.
162