Routing Connecting Cables - Viessmann VITODENS 200 Installation Instructions Manual

Electrical connections

Routing connecting cables

!
Please note
Connecting cables will be damaged if they contact hot parts.
When routing and securing connecting cables on site, ensure that the
maximum permissible temperatures for these cables are not exceeded.
A Low voltage connections
B 230 V connections
C Internal extension
D Main PCB
E Communications module
Remove the existing cable grommet
when using larger cross-sections (up
to 714 mm). Secure the cable with
the cable grommet F (black) inte-
grated into the casing base.
(cont.)
F Cable grommet for power supply
cable
% Plugs for connecting the cylinder
temperature sensor to the cable
harness
13