GE 21 Owner's Manual And Installation page 19

Door Alignment
After leveling, make sure that doors are even at the top.
To make the doors even, adjust the fresh food door. Using a 7/16" socket wrench, turn the door adjusting
screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin,
prevents the pin from turning unless a wrench is used.) After one or two turns of the wrench, open and close
the fresh food door and check the alignment at the top of the doors.
To remove the base grille,
open the doors, remove
the screw at each end of
the base grille and then
pull the grille straight out.
Dimensions and Specifications
"
70 1 ⁄
4
36"
24"
7/16" Socket Wrench
Raise
(for CustomStyle models)
24" Cabinet
Water Electrical
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
25"
Counter Top
19