Table of Contents
Advertisement
TG5200CE.fm.fm Page 15 Tuesday, March 23, 2004 11:37 AM
Display Language
You can select either "English" or "Français" (French) as the display language. The
factory preset is "English".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Change language" by pressing
[d] or [B], then press the soft key (
4
To change from English to French, press the
soft key (
).
FRANÇ.
To change from French to English, press the
soft key (
).
ENGLISH
• The display changes to the selected language.
• You can also select the display language by
pressing [d] or [B].
5
When French is selected, press the soft key (
When English is selected, press the soft key (
• If you select a language you cannot read, change the display language again
using direct commands (p. 53).
Dialing Mode
Handset
If you have touch tone service, set the dialing mode to "Tone". For rotary or pulse
service, set to "Pulse". The factory preset is "Tone".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set tel line" by pressing [d] or
[B], then press the soft key (
4
Press the soft key (
mode".
5
Select "Pulse" or "Tone" by pressing [d] or
[B].
6
Press the soft key (
Programmable Settings
Handset
SELECT
SELECT
SELECT
).
SELECT
) at "Set dial
SELECT
), then press [OFF].
SAVE
Initial setting
).
Change language
).
Display
:English
), then press [OFF].
SAUV.
), then press [OFF].
SAVE
Initial setting
).
Set tel line
Set dial mode
Set dial mode
:Tone
15
Advertisement
Chapters
Table of Contents
