Installing the microSDHC™ Card
You can install and remove the microSDHC card while the phone
is turned on.
Unmount the microSDHC card
Charging the Battery
The phone battery should have enough power for the phone to
turn on, find a signal, and make a few calls. Fully charge the
battery as soon as possible.
The phone displays a message when the battery is low. As the
phone charges, the screen displays the exact battery level.
WARNING! Use only ZTE-approved chargers and cables.
Using unapproved accessories could damage the phone or
cause the battery to explode.
before removing it.
1. Remove the back cover.
2. Hold the microSDHC card
with the metal contacts
facing down and slide it in.
3. Replace the back cover.
NOTE: Some apps may
require a microSDHC card to
store certain data and to work
properly. ZTE recommends
keeping a microSDHC card
installed and not to remove or
replace it unnecessarily.
15