Residual Risks; Important Safety Instructions For All Battery Chargers - DeWalt DCT410 Original Instructions Manual

• Do not disassemble the inspection camera.
There are no user serviceable parts inside.
• Do not use anywhere the unit may
come into exposure with moving parts,
hazardous chemicals, or electrical charges.
Such situations may result in serious injury or
death; such as walls, pipes, automobiles, and
machinery.
• Do not operate inspection camera near
moving machinery. Can result in injury if the
camera cable gets caught into moving parts
and pulls the user in.
• Ensure the work area is free of current-carrying
parts during the work process.
• Do not use the inspection camera around
corrosive chemicals. Exposure to corrosive,
oily environments can ruin the plastic covering
on the camera head and ruin the picture quality.
• Do not use the camera if condensation
forms inside the lens. Let the water evaporate
before using again.
• Do not remove or deface warning labels.
• To avoid damaging the inspection camera or
the equipment under test, protect them from
the following:
– E MF (electromagnetic fields) like from arc
welders, induction heaters, etc.
– ESD (electrostatic discharge).
– T hermal shock (caused by abrupt ambient
temperature changes for highest accuracy;
allow 30 minutes for thermometer to stabilize
before use).
WARNING: Do not expose camera,
monitor or battery to excessive heat
such as sunshine, fire or the like.
WARNING: Shock hazard. Do not
allow the inspection camera cable
to come into contact with live wires.
Shut off circuit breakers to the entire
area to avoid injury.
WARNING: Do not use on humans
or animals. This is not for human or
animal use and can cause injury if used.
WARNING: ALWAYS use safety
glasses. Everyday eyeglasses are
NOT safety glasses. Also use face or
dust mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT.
CAUTION: When not in use, place
inspection camera on its side on
a stable surface where it will not
cause a tripping or falling hazard.
Some tools with large battery packs will
stand upright on the battery pack but
may be easily knocked over.
WARNING: Modifications not
authorised by the manufacturer may
void user's authority to operate this
device.

residual risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Risk of personal injury due to prolonged use.
– Risk of personal injury due to unintentional
contact with current-carrying parts during the
work process.
markings on inspection Camera
The following pictograms are shown on the
inspection camera:
Read instruction manual before use.
date Code position
The date code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2014 XX XX
Year of Manufacture
important safety instructions for all
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DCB105, DCB107 and DCB112 battery
chargers.
• Before using charger, read all instructions and
cautionary markings on charger, battery pack,
and product using battery pack.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only D
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
E ng l i s h
WALT
e
5