Olympus SP-810UZ Instruction Manual page 13

When to charge the batteries When to charge the batteries
Charge the battery when the error message shown below
appears.
Flashes in red
00:34 00:34
4 4
14
M
Monitor top left
Setting up using the supplied CD
Installation of [ib] computer software using the
supplied CD is available on Windows computers only.
Windows Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
●
A "Setup" dialog will be displayed.
Windows Vista/Windows 7
●
An Autorun dialog will be displayed. Click "OLYMPUS
Setup" to display the "Setup" dialog.
Battery Empty
Error message
If the "Setup" dialog is not displayed, select "My
Computer" (Windows XP) or "Computer" (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
"OLYMPUS Setup" window and then double-click
"Launcher.exe".
If a "User Account Control" dialog is displayed, click
"Yes" or "Continue".
2
Register your Olympus product.
●
Click the "Registration" button and follow the on-
screen instructions.
To register the camera must be connected to the
computer. "Connecting the camera" (p. 12)
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Charge the battery and
then connect the camera again.
3
Install OLYMPUS Viewer 2 and [ib] computer
software.
●
Check the system requirements before beginning
installation.
●
Click the "OLYMPUS Viewer 2" or "OLYMPUS ib"
button and follow the on-screen instructions to
install the software.
OLYMPUS Viewer 2
Operating Windows XP (Service Pack 2 or later) /
System Windows Vista / Windows 7
Processor Pentium 4 1.3 GHz or better
1 GB or more (2 GB or more
RAM
recommended)
Free Hard
1 GB or more
Drive Space
1024 x 768 pixels or more
Monitor
Minimum 65,536 colors (16,770,000
Settings
colors recommended)
13
EN