Olympus SP-810UZ Instruction Manual page 37

Viewing the image immediately after Viewing the image immediately after
shooting [Rec View] shooting [Rec View]
J (Shooting menu 2)  Rec View
Submenu 2
The image being recorded is not
displayed. This allows the user
Off to prepare for the next shot while
following the subject in the monitor
after shooting.
The image being recorded is
displayed. This allows the user to
On
make a brief check of the image that
was just taken.
Automatically rotating images shot with Automatically rotating images shot with
the camera in a vertical position during the camera in a vertical position during
playback [Pic Orientation] playback [Pic Orientation]
J (Shooting menu 2)  Pic Orientation
During shooting, the [y] (p. 41) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
Submenu 2
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
Off
images. Images shot with the camera
in a vertical position are not rotated
during playback.
Information about the vertical/
horizontal orientation of the camera
On during shooting is recorded with
images. Images are automatically
rotated during playback.
Application
Application
Displaying icon guides [Icon Guide] Displaying icon guides [Icon Guide]
J (Shooting menu 2)  Icon Guide
Submenu 2
Off No icon guide is displayed.
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
On
selected (position the cursor on
the icon for a while to display the
explanation).
Icon guide
Imprinting the date of recording Imprinting the date of recording
[Date Stamp] [Date Stamp]
J (Shooting menu 2)  Date Stamp
Submenu 2
Off Do not imprint the date.
Stamp new photographs with the
On
date of recording.
When the date and time are not set, [Date Stamp]
cannot be set.
"Date, time, time zone, and language" (p. 15)
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] or [3D]
mode.
Application
3D 3D P P
Program Auto Program Auto
Functions can be changed
manually.
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
4 4
14
N
MENU MENU
M ORM
Application
EN
37