Olympus E-P2 Instruction Manual page 124

Monitor
indication
m
Internal camera
temperature is too
high.
Please wait for
cooling before
camera use.
BATTERY
EMPTY
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS
CHANGED
10
PRINT ERROR
CANNOT PRINT
The lens is locked.
Please extend the
lens.
Please check the
status of a lens.
124
EN
Possible cause
The internal temperature of the
camera has risen due to
continuous use, for example.
The battery is drained.
The camera is not connected to
the computer or printer correctly.
There is no paper in the printer.
The printer has run out of ink.
The paper is jammed.
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed on
this camera.
The lens of the retractable lens
stays retracted.
An abnormality has occurred
between the camera and the
lens.
Corrective action
Turn off the camera and wait for the
internal temperature to cool.
Wait a moment for the camera to turn off
automatically. Allow the internal
temperature of the camera to cool before
resuming operations.
Charge the battery.
Disconnect the camera and connect it
again correctly.
Load some paper in the printer.
Replace the ink cartridge in the printer.
Remove the jammed paper.
Do not manipulate the printer while
making settings on the camera.
Turn off camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a personal computer to print.
Extend the lens.
Turn off the camera, check the connection
with the lens, and turn the power on again.