2-2 Screen Adjustment Setup Manual (separate volume) carefully 2-3 Color Adjustment 2-4 Off Timer Settings to familiarize yourself with safe and 2-5 Power Indicator/EIZO Logo Display Settings effective usage. 2-6 Locking Buttons 2-7 Disabling DDC/CI Communication ・Please refer to the Setup Manual...
EIZO NANAO CORPORATION’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor.
Page 4
WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
Page 5
WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit.
Page 6
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting.
Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note •...
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-D and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24.8 - 60 kHz Digital: 31 - 49 kHz •...
1-3 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 10 for operation) (for analog signal input only) Page 12 Screen Adjustment (Automatic Adjustment) ● To adjust flickering and position [Screen] …………………………… see page 12 •...
[Off Timer] …………………………… see page 17 EIZO Logo Display Setting Setting Adjustment Menu Position ● To adjust the menu position ● To display EIZO logo [EIZO Logo Appearing [Menu Position] …………………… see page 19 Function] ………………………… see page 18 BrightRegulator setting Locking Buttons ●...
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and User’s Manual.
Adjustment Program, refer to Run the Screen Adjustment Program. “Readme.txt” or the “read me” file. Load the EIZO LCD Utility Disk on the PC, and start the Screen You can run the program directly Adjustment Program compatible with the PC in use.
Page 15
Note Perform advanced adjustments for the following using the • Press the control button slowly so as not to miss the adjustment point. <Screen> menu of the Adjustment menu. • When blurring, flickering or bars ● To eliminate vertical bars [Clock] appear on the screen after adjustment, proceed to [Phase] to remove (1) Choose <Clock>...
Page 16
Adjust the signal output range. ● To adjust color gradation automatically [Range] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose <Range> from the <Auto Adjustment> menu, and press (2) Select “Execute” with , and press (3) Color gradation is adjusted correctly by the auto-adjustment function.
2-3 Color Adjustment Simple Adjustment [FineContrast Mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast mode An appropriate display mode is selectable out of three modes. Mode Purpose Custom Available for making desired setting. Suitable for color matching with sRGB compatible sRGB peripherals.
Advanced Adjustments [Adjustment Menu] Attention • Perform [Range Adjustment] before Independent setting and saving of color adjustment are available for each starting color adjustment for analog input signals. FineContrast mode. Refer to “To adjust color gradation ● To select an appropriate mode for images automatically”...
2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] Attention This function allows the monitor to automatically turn off after a specified time • The Off Timer functions even in the has passed. This function serves to reduce afterimages caused when the monitor power saving mode, but the advance screen is left on for a long time period without use.
To display EIZO logo [EIZO Logo Appearing Function] Note • The logo appears with the default When this unit is turned on, the EIZO logo appears at the center of the screen. setting. Selection to display or not to display the logo is available with this function.
2-7 Disabling DDC/CI Communication ● To disable DDC/CI communication [Procedure] (1) Press to turn off the unit. (2) Press again while pressing DDC/CI communication setting is disabled. [Resetting] (1) Press to turn off the unit. (2) Press again while pressing DDC/CI communication setting is enabled.
2-10 Setting BrightRegulator ● To set automatic brightness adjustment [BrightRegulator] Note • Be careful not to block the sensor on The sensor on the front side of the monitor detects the environmental brightness the lower side of the monitor when to adjust the screen brightness automatically and comfortably.
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples D-sub mini DVI-D connector 15-pin Connector To PC 2 To PC 1...
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems → See No.3 - No.11. • Other problems → See No.12 - No.14. Problems Possible cause and remedy No picture...
Page 25
Problems Possible cause and remedy Afterimages appear. • Use a screen saver or off timer function for a long-time image display. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. Green/red/blue/white dots or defective dots remain •...
The stand can be removed and replaced with an arm (or another stand) to be Attention • When attaching an arm or stand, attached to the monitor. Use an arm or stand of EIZO option. follow the instructions of their user’s manual.
5-2 Power Saving Mode Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] Attention Power Monitor • Unplugging the power cord Indicator completely shuts off power supply to Operating Operating Blue the monitor. Power STAND-BY Power saving Orange •...
Main default settings (factory settings) BrightRegulator Disable Smoothing FineContrast Mode Custom Input Signal Auto Off Timer Disable Language English Outside Dimensions unit : mm (inch) 313(12.3) 81(3.19) SWIVEL 346(13.6) 69(2.72) 305.4(12) 38.5 (1.52) 123(4.84) 100(3.9) 123(4.84) 43.5 (1.71) 200(7.9) 175(6.9) (217)(8.5) Chapter 5 Reference...
Page 30
Pin No. Signal Red video Red video ground Green video Green video ground Data (SDA) Blue video Blue video ground H. Sync V. Sync Ground Ground Clock (SCL) (NC*: No Connection) Option List Cleaning Kit EIZO ScreenCleaner Chapter 5 Reference...
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). Attention • Display position may be deviated Frequency depending on the PC connected, Mode Dot clock Polarity Horizontal: kHz which may require screen adjustment Vertical: Hz using Adjustment menu.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord...
Page 34
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß...