Fueling - Stihl BR 350 Instruction Manual

English

Fueling

Preparations
Before fueling, clean the fuel filler
N
cap and the area around it so that
dirt cannot fall into the tank.
Thoroughly shake up the mixture in the
canister before fueling your machine.
WARNING
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
Do not spill any fuel and do not fill the
tank up to the brim.
Your power tool comes standard with
either a screw-type or bayonet-type fuel
cap.
16
Bayonet fuel cap
Screw-type tank cap
Open the bayonet fuel filler cap
WARNING
Never use a tool to open the bayonet
catch. This could damage the cap and
cause fuel to leak out.
1.
2.
Press the cap down with your hand
N
as far as possible, turn it
counterclockwise (approx. 1/8 turn)
and remove it.
Fueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Close the bayonet fuel filler cap
1.
2.
Fit the cap and turn it until it
N
engages in the bayonet mount.
Press the cap down with your hand
N
as far as possible and turn it
clockwise (approx. 1/8 turn) until it
engages completely.
BR 350, BR 430