Note
•
Not available when Dynamic Contrast is set to On.
•
If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color
Temp. function is disabled.
Color Temp.
Color Temp. is a measure of the 'warmth' of the image colors.
Note
•
Not available when Dynamic Contrast is set to On.
•
This function is only enabled if the Color Tone is set to Off.
Size
The Size can be switched.
1.
16:9 - Sets the picture to 16:9 wide mode.
2.
Zoom 1 - Magnifies the size of the picture on the screen.
3.
Zoom 2 - Magnifies the size of the picture more than "Zoom 1".
4.
4:3 - Sets the picture to 4:3 normal mode.
5.
Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.
Note
•
Certain external devices may feed the display an out of spec signal that may cause cutoff
even when using the Just Scan feature.
•
ZOOM1, ZOOM2 will be unavailabel in HDMI mode.
•
The Position and Reset functions are available when ZOOM1 or ZOOM2 is run.
•
Not available when Dynamic Contrast is set to On.
Adjusting the LCD Display