Auto Adjustment; Signal Balance; Signal Control - Samsung SyncMaster 520DX User Manual

Adjusts the screen location vertically.

Auto Adjustment

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in PC mode only)
Note
The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.
(Available in PC mode only)
Signal Balance
Selects either On or Off with the signal control.

Signal Control

1.
R-Gain
2.
G-Gain
3.
B-Gain
4.
R-Offset
5.
G-Offset
Adjusting the LCD Display