Olevia 242T FHD User Manual page 44

On Screen Displays (OSD)
Cropping Method 1
Crops 16 pixels on R/L edge of image,8
lines on top/bottom edge of image, and
then enlarges it to fill the screen.
(For all sources except Tuner source)
On : (recommended)
Off :
Cropping Method 2
Crops image, and then enlarges it to fill
the screen.
(Tuner Source Only)
Off :
Minimum : To crop 16 pixels on the R/L
edge of image, 8 lines on the top/bottom
edge of image (recommended)
Medium : To crop 24 pixels on the R/L
edge of image, 16 lines on the top/bottom
edge of image
Maximum : To crop 32 pixels on the R/L
edge of image, 24 lines on the top/bottom
edge of image
(Note: This feature helps remove any noise visible
under both vertical and horizontal edges of the
image.)
View
You can select three view types of picture
modes that best suits the program you
are watching. You can set a different view
mode for each video mode for each input
and store it manually.
Full Screen :
Enlarges the image to full the screen.
Pic1
PIP :
Picture-in-Picture has a Main screen and
small screen view.
Connected to two input sources. PIP is
available on selected models.
Pic1
Pic2
(To show (To select
the Main the item)
Menu)
Screen
View
(To select
the item)
(To enter the
sub-menu)
(To select the item)
View
PIP
(To go back last OSD Menu or exit OSD Menu)
41
OSD-Screen
(To enter the
sub-menu)