Oki S900 User Manual page 78

For minimum system requirements, refer to the Unimessage
Pro User's Guide.
Follow the steps below, omitting step 5(a).
1. Start Microsoft Windows.
2. Insert the Utilities and Documentation CD-ROM into your CD-
ROM drive.
3.
The CD-ROM will autolaunch on most systems. However, if
your system does not support autolaunching CD-ROMs, press
the Start button, choose RUN, type d:\setup.exe (d: the CD-
ROM drive in use), and then click OK.
4.
Double-click on your language.
5. Carry out either (a) or (b).
(a) For copying and/or scanning
Double-click on Install Update Tool and follow the on-
screen instructions.
(You can uninstall the Printer Profile Utility by selecting
Start>Programs>S900 Scancopier Printer Profile Utility
and clicking the Uninstall Utility icon in the group.)
Double-click on Install TWAIN and follow the on-screen
instructions to complete the driver installation. (You
may need to follow the instructions shown on the Add
New Hardware Wizard to let Windows identify your new
USB device before or after the driver installation.)
(You can uninstall the S900 driver by selecting
Start > Programs > S900 and clicking the Uninstall Driver
icon from S900 group.)
(b) For copying and/or scanning and messaging
Double-click on Install Update Tool and follow the on-
screen instructions.
Double-click on Install Unimessage Pro + TWAIN and
follow the on-screen instructions, referring to the
Unimessage Pro User's Guide for detailed instructions.
APPENDIX D – SETTING UP > 78