Raymarine a65 Operation Instructions Manual page 152

4. If the pop-up is displayed, select Continue.
The onscreen keyboard is displayed.
5. Enter the relevant racemark IDs, in order, using
a comma to separate each ID that you want to
include in your route.
e.g. entering A2,HK,M5,S,4 and selecting
CREATE ROUTE will search for and create a
route using the 5 waypoints with matching IDs.
Once created you can select individual waypoints
and apply rounding instructions.
Adding rounding instructions to waypoints
within a route
Rounding instructions can be added to waypoints
within a route to indicate the direction the vessel
should take around the waypoint.
To use the Rounding feature the Boat Type setting
must be set to a sailing vessel.
With the Route plan displayed:
1. Select the Waypoint that you want to add a
rounding direction to.
2. Select Rounding Direction.
3. Select a rounding option:
• None
• Leave to Port
• Leave to Starboard
152
Waypoint symbols with pre-defined rounding
instructions
Some waypoint symbols have pre-defined rounding
instructions that cannot be changed or removed.
Green racemark
anti-clockwise
Yellow racemark
anti-clockwise
Red racemark
anti-clockwise
Adjusting chart range while building a route
From the Build Route menu:
1. Use the on-screen Range In and Range Out
icons to range in and out of the chart.
Adjusting the chart range while building a
route
From the Build Route menu:
1. Use the Range In and Range Out buttons to
range in and out of the chart.
Build a route from a track
You can create a route from a recorded track.
When a track is converted the system creates the
closest route through the recorded track, using the
minimum number of waypoints. Each waypoint
created will be saved with the depth and temperature
data (if applicable) for that position.
D11752-2
Note: If a track break occurs, only the last segment
is converted to a route.
Building a route from a track
From the Track List:
• accessed from the homescreen: My Data >
Tracks
• accessed from the chart application: Menu > My
Data > Tracks
1. Select the Track you want to convert to a route.
The track options dialog is displayed.
2. Select Create Route From Track.
On completion, the maximum deviation of the
route from the recorded track is displayed in a
dialog and the new route is added to the route list.
LightHouse multifunction display operation instructions
Green Racemark
clockwise
Yellow Racemark
clockwise
Red Racemark
clockwise