Oki C821 User Manual page 68

ITEM
Erase HDD
Enable initialization
Storage setup
ITEM
Enable initialisation
Power setup
ITEM
Peak Power Control
Power Save
USB Host Power
Language setup
ITEM
Language Initialize
SETTINGS
Execute
No
Yes
SETTINGS
Yes/No
SETTINGS
Normal/Low
Enable
Disable
Off/On
SETTINGS
Execute
Menu functions - C821 and C830 > 68
EXPLANATION
Deletion of all data stored in the hard disk. DoD
5220.22-M sanitizing formula is used for clearing the
disk. The machine will restart after changing setup. The
following message appears after pressing the Enter
switch.
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu
If Yes is selected the procedure for clearing disk will
start immediately after the machine reboots.
If the Cancel button is held down during erasing, the
following confirmation messages will appear to
discontinue processing.
Do You Wish to Cancel?
Yes
No
If NO is selected, the procedure will continue. If YES is
selected, the procedure will discontinue.
Prevents a setting change accompanying initialization of
Block Device (HDD,FLASH).
EXPLANATION
EXPLANATION
Sets peak Power control level.
Sets Enable/Disable of Power Save Mode.
Sets power supply for USB-HOST of the whole power
save mode.
When Off, suppress power supply.
When On, do normal power supply.
EXPLANATION
Initialises the message file loaded in FLASH.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.