Selectable Listening Modes; Playback Function - Onkyo HT-R695 Basic Manual

> Specifications > Settings

Selectable Listening Modes

You can select a variety of listening modes to suit the audio
format of the signal being input. Refer to the following for
the listening mode choices.
• Listening modes available when headphones are
connected are: Pure Audio (European, Australian and
Asian models), Mono, Direct, and Stereo.
■ Updating of listening modes
We plan to provide support for the DTS:X audio format
through firmware updates for this unit. This means that
the selectable listening modes depend on the version of
firmware.
On firmware version before DTS:X support
• You can select Neo:6 Cinema and Neo:6 Music.
On firmware version after DTS:X support
• You can select DTS:X and DTS Neural:X. (You cannot
select Neo:6 Cinema and Neo:6 Music after updating.)
38
> Listening Modes > Playback Function
■ MOVIE/TV button
This is a list of listening modes you can select according to
the audio format of the input signal.
Input Format
Analog
A center speaker or surround speakers need to be installed.
1
Surround speakers or height speakers need to be installed.
2
A center speaker, surround speakers, or height speakers need to be
3
installed.
Input Format
PCM
Music files (except DSD/
Dolby TrueHD)
A center speaker or surround speakers need to be installed.
1
Surround speakers or height speakers need to be installed.
2
A center speaker, surround speakers, or height speakers need to be
3
installed.
Input Format
Multich PCM
Listening Mode
Direct
Mono
Dolby Surround
Neo:6 Cinema
1
DTS Neural:X
TV Logic 2 A center speaker or surround speakers need to be installed.
1
Surround speakers or height speakers need to be installed.
2
AllCh Stereo 3 A center speaker, surround speakers, or height speakers need to be
3
installed.
Full Mono 3
Input Format
T-D
DSD
Listening Mode
Direct
Mono
Dolby Surround
Neo:6 Cinema 1
DTS Neural:X
TV Logic 2 Cannot be selected when the input format is monaural or 2 ch.
1
A center speaker or surround speakers need to be installed.
2
AllCh Stereo 3
Can only be selected when the input format is 2 ch and a center speaker
3
or surround speakers are installed.
Full Mono 3
Surround speakers or height speakers need to be installed.
4
A center speaker, surround speakers, or height speakers need to be
5
T-D
installed.
> Basic Manual
Troubleshooting | Appendix
Listening Mode
Direct
Multich 1
Dolby Surround
DTS Neural:X
TV Logic
2
AllCh Stereo 3
Full Mono 3
T-D
Listening Mode
Direct
DSD 1 2
Dolby Surround
Neo:6 Cinema 3
DTS Neural:X
TV Logic 4
AllCh Stereo
5
Full Mono 5
T-D