> Specifications
> Settings
1. Connect the
and
speakers as shown below
using the FRONT terminals and SURROUND BACK or
HEIGHT terminals.
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.
> Listening Modes > Playback Function
■ Dolby Enabled Speaker (Surround)
Install the
Front speakers and
Speakers (Surround) as shown in the figure to enjoy the
Dolby Atmos listening mode. Dolby Enabled Speakers
are Height speakers and installed on the top board of the
surround speakers.
1. Connect the
using the FRONT terminals and SURROUND BACK or
Dolby Enabled
HEIGHT terminals.
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.
> Basic Manual
Troubleshooting | Appendix
and
speakers as shown below
29