Installer Checklist To Be Completed By Installer Upon Installation - Bosch 940 ESO Manual

19 Installer Checklist to be completed by installer
upon installation
Serial Number
(8 digit serial number is located
on rating plate on right side
panel)
1)
Gas Pressure Reading
Static
Operating
Water Pressure
Building Water Pressure
Range if on Well system
Installing Company
Installer name
Address
Phone
Table 29
1) See Chapter 8.6, page 23 and gas pressure table (to be filled out by installer)
Installation manual should be left with the owner after
the installation is tested and completed.
940 ESO
___ ___ ___ ___ ___ ___ ___ ___

Installer Checklist to be completed by installer upon installation | 51

6 720 644 956 (2016/05)