Erasing The Last Track (Cd-Rw) - Teac CD-RW890MKII Owner's Manual

1
Load a recorded CD-RW.
2
Press the ERASE button in the stop mode.
"ERASE" and the last track number appear on the display .
You can simultaneously erase multiple tracks, from the selected
one to the last one . Press the Skip (.//) buttons to select
the number of the first track to erase . (You cannot erase only tracks
in the middle of the CD . )
< Each time the ERASE button is pressed, the display changes as
follows:
ERASE #
(#: The last track number)
ERASE DISC
REFRESH
Total number of tracks and total playback time
< If only one track is recorded, "ERASE" and the last track number do
not appear . The display changes in the following order:
ERASE DISC
REFRESH
Total number of tracks and total playback time
< If a finalized disc is inserted, "UNFINALIZE" appears . To erase the
track(s), unfinalize the disc first .
22

Erasing the Last Track (CD-RW)

3
Press the Play (y) button to start erasing.
Only the last track, or tracks from the selected one to the last one,
will be erased .
When the operation has been finished, the display returns to the
track/time display .
< Never turn the power off nor unplug the power cord during
erasing .
< During erasing, no buttons will work .
< This operation cannot be cancelled . Before erasing the track or
tracks, make sure that you really want to erase them .