DSL-2650U
Ethernet WAN Connection
1. Go to the Advanced / Interface grouping page.
2. Select the choice corresponding to the LAN port that will be used as the
WAN port of the Ethernet WAN port radio button, and click the Save
button.
3. Go to the Net / WAN page and click the Add button.
4.
In the General settings section, from the Provider drop-down list,
leave the Manually value.
From the Connection Type drop-down list, select the needed value.
5.
6.
From the Port drop-down list, select the value corresponding to the LAN
port that will be used as the WAN port.
7. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
20