Setting A Computer Image To The Correct Rgb Select Screen - NEC PlasmaSync 42XM5 PX-42XM5G User Manual

Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"852 480 "
On "RGB SELECT" of "OPTION1" menu, select
"852 480".
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
SEL.
Information
RGB SELECT modes
AUTO: Select the suitable mode for the specifications
of input signals as listed in the table "Computer input
signals supported by this system" on page En-41.
The others: The available resolutions are shown.
See page En-41 for the details of the above settings.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "HD SELECT" mode to "1035I"
On "HD SELECT" of "OPTION1" menu, select "1035I".
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
SEL.
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B: Standard digital broadcasts
1035I: Japanese "High Vision" signal format
1080A: Special Digital broadcasts (for example :
DTC100)
Downloaded From TV-Manual.com Manuals
OPTION 1 1 / 4
: RGB
: RGB
: 852 480
: 1080B
: OFF
: OFF
NEXT PAGE
ADJ. RETURN
EXIT
OPTION 1 1 / 4
: RGB
: RGB
: AUTO
1035 I
:
: OFF
: OFF
NEXT PAGE
ADJ. RETURN
EXIT
Setting the Input Skip
When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to "ON"
On "INPUT SKIP" of "OPTION1" menu, select "ON".
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL. ADJ.
Information
INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan
and display all signals.
ON: If no input signal is present, skip that signal.
* "SETTING NOW" will appear during the input search.
Resetting to the default values
Use these operations to restore all the settings (PICTURE,
AUDIO, IMAGE ADJUST, OPTION1~4, etc.) to the
factory default values.
Refer to page En-19 for items to be reset.
On "ALL RESET" of "OPTION1" menu, select "ON", then
press the MENU/ENTER button.
OPTION 1
OSM
BNC INPUT : RGB
D-SUB INPUT : RGB
RGB SELECT
: AUTO
HD SELECT : 1080B
INPUT SKIP : OFF
ALL RESET : ON
NEXT PAGE
SEL. MENU/ENTER OK EXIT RETURN
When the "SETTING NOW" screen disappears, then all the
settings are restored to the default values.
En-25
OPTION 1 1 / 4
: RGB
: RGB
AUTO
1080B
:
: ON
: OFF
EXIT RETURN
1 / 4
ALL RESET
SETTING NOW