Installing The Drivers Manually - Oki MB 260 User Manual

9 Click on the N button.
EXT
10 Select I
NSTALL DRIVERS
N button.
EXT
11 Select the destination folder for installation and
click on the N button.
EXT
12 The final installation is ready to be executed. Click
on the I button.
NSTALL
13 A screen informs you of the installation progress.
in the list and click on the
14 Click on OK to finish the installation.
The Companion Suite Pro software is now installed on
your PC.
You can now connect your multifunction machine, refer to
paragraph Connections, page 36.

Installing the drivers manually

You can install the printer and scan drivers manually
without running any setup software.
This installation mode is only possible
Note
on Windows 2000, XP and Vista.
1 Locate your USB cable connectors and connect as
shown below on the picture.
2 Power on your multifunction machine.
The PC detects the device.
3 Click on L
OCATE AND INSTALL DRIVER SOFTWARE
(
RECOMMENDED
- 35 -
MB260
).