Advertisement
Cleaning Your Humidifier
1. Unplug power cord from socket. Wait until water in tank cools down before cleaning.
2. Use soft damp cloth to wipe exterior of unit. Never use solvent, gasoline, xylene, or talcum powder.
3. Wipe water scale off inside of water slot with soft wet cloth. A small brush can be used to remove water scale from
smaller parts.
4. Gently clean Float Switch (11) using cloth and/or brush.
5. Use small brush to remove water scale from atomizer, and wipe with soft cloth. Never use metal brush, blade, abrasive
brush or talcum powder to clean atomizer.
6. Remove misting nozzle first, and then remove cover at bottom of water tank by turning clockwise. Dispose of excess water
in tank.
7. Clean water tank and cover with clean water. Do not use force to clean cover. Damage to seal may result.
8. Wipe entire unit with dry cloth, and allow to air dry fully.
9. To store, reassemble unit, place in plastic bag, pack into original box, and store in low-humidity environment.
Troubleshooting
No Mist:
• Ensure power cord is plugged in correctly.
• Check for low water indicator and add water.
Weak Mist:
• Switch to stronger misting setting.
• Remove scale from atomizer.
No Warm Mist:
• Switch warm mist on in Personal Setup Mode.
• Allow 10-20 minutes for water to heat up.
Difference Between Current Humidity & Hygrograph is Too Great:
• Clean air inlet of dust or other obstructions.
• Position unit away from window, heater, etc.
Strange Smell:
• Ensure that cool, clean water is being used.
• Remove scale, etc. from water slot or atomizer.
Technical Specifications
Rated Voltage:
Power Consumption:
Water Capacity:
Misting Rate:
Dimensions:
Weight:
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
info@myivation.com
Made in China
ivation is a trademark of
C&A IP Holdings, LLC
©2015 All right reserved
AC220-240V/50Hz, AC100-120V/50-60Hz
30W (Cool Mist), 90W (Warm Mist)
5 Liters
Maximum 0.45 Liter/Hour (w/Warm Mist Humidifying)
9.84" x 5.7" x 14.37"
5.9 Lbs.
Advertisement
