Wireless Setup - D-Link DCS-5025L User Manual

Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable Check this box to allow your camera to connect to your network
Wireless: wirelessly.
SSID: Enter the network name (SSID) of the wireless network you want
to connect to. You can also click the Site Survey button below
to choose an available network and fill in settings automatically.
If you are using Ad-Hoc as your connection mode, select the
Channel:
same channel that is being used by your wireless network.
Connection Select the connection mode used by your wireless network. In
most cases, you should select Infrastructure. Ad-Hoc is only
Mode:
used if your camera is directly connecting to another PC or
device without the use of a router or access point.
Site Survey: Clicking this button will allow you to select an available wireless
network to connect to, and will fill in the necessary settings for
you.
Wireless Select the wireless security mode used by your wireless network.
Security If you select WEP or WPA-PSK/WPA2-PSK, enter the password
Mode: for your wireless network in the text box that appears.
D-Link DCS-5025L User Manual

Wireless Setup

34 34